FEED THROUGH TERMINALS
Vibrations adversely affect terminal connection, causing loosening of conductors and consequent overheating of terminal blocks.
EARTH TERMINALS
elmex three level terminal blocks can be used for high-density wiring and for wiring special equipment such as proximity sensors. DUSD4 has a special link attached to the middle and lower level to facilitate the interconnection between adjacent terminal blocks, DU3D4 and DUSD4.
MULTI-LEVEL TERMINALS (DOUBLE DECK)
elmex Multi Level Terminals are the perfect solution where space is a constraint and high density wiring is needed. The compact design of these Terminals with 6 mm thickness allows double wiring density and reducing the total number of terminal blocks to half.
STUD TYPE TERMINALS (SCREW DRIVER OPERATED
These are the same group of Stud Type Terminals, however, they have their own hinged individual protective covers, which are lifted up for connection and closed down after conductors are connected. This design makes them totally finger-safe, enhancing total safety.
STUD TYPE TERMINALS
These are the same group of Stud Type Terminals, however, they have their own hinged individual protective covers, which are lifted up for connection and closed down after conductors are connected. This design makes them totally finger-safe, enhancing total safety.
FUSE TERMINALS
Applications in Control & Automation require fuse protection facility. elmex offers Terminal Blocks with built-in safety fuse levers. These Terminal Blocks accommodate a glass cartridge fuse of 5 mm x 20 mm, 5 mm x 25 mm or 6 mm x 32 mm size.
DISCONNECTING TERMINALS (SLIDING LINK TYPE)
Certain Application in Control and Measurement circuits necessitate locating operating faults quickly without disconnecting the conductors.
POWER TERMINALS
elmex offers a wide variety of Power / Bus-Bar / High Current Terminals suitable for all types of cables (solid, stranded, with fork type and ring type lugs) both in Polyamide 66 and Melamine Housing.
DISTRIBUTION BLOCKS
elmex distribution blocks are an Innovative Engineering Solution to satisfy customer’s needs. They find application in Power Distribution for Control Circuits and can also be used to centralize earthing for the entire panel.
MICRO TERMINALS (15mm Rail Mounted)
elmex Micro Terminal Blocks are small in size and light in weight, yet functionally same as Standard Terminal Blocks. They are specially developed for installation where space is extremely limited but the same cable density is required as in a normal situation.
SPRING CLAMP TERMINALS- FEED THROUGH (35mm Rail Mounted)
Vibrations adversely affect terminal connection, causing loosening of conductors and consequent overheating of terminal blocks. elmex Terminal Blocks are therefore designed to be inherently resistant to vibrations in normal applications.
DIN RAIL MOUNTED TERMINALS MELAMINE
Terminal Type – CST10 , Feed Through Terminal block, nominal voltage: 800 V, nominal current: 57 A, Rated cross-section: 10 mm², connection method: Screw connection, number of connections: 2, cross-section: 0.5 mm² – 16 mm², mounting type: TS32
Tape Wound / Polycarbonate Encapsulated CT's
elmex has been serving electrical industry & providing termination solution for the last five decades & Now serve the larger segment of this industry, we are adding instruments transformers, both current & voltage Transformers to our range of product.
Resin Cast CT's
elmex has been serving electrical industry & providing termination solution for the last five decades & Now serve the larger segment of this industry, we are adding instruments transformers, both current & voltage Transformers to our range of product.